Wholesale Actros Truck Hub Bolt - Hino Fuso Universal Rear Bolt – JINQIANG

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

It can be our accountability to satisfy your preferences and competently provide you. Your satisfaction is our greatest reward. We are searching ahead towards your visit for joint growth for Truck Bearing, 5th Wheel Mounting Brackets, Trailer Hub Lug Bolts, We guaranteed quality, if customers were not satisfied with the products' quality, you can return within 7days with their original states.
Wholesale Actros Truck Hub Bolt - Hino Fuso Universal Rear Bolt – JINQIANG Detail:

Product description

Hub bolts are high-strength bolts that connect vehicles to the wheels. The connection location is the hub unit bearing of the wheel! Generally, class 10.9 is used for mini-medium vehicles, class 12.9 is used for large-sized vehicles! The structure of the hub bolt is generally a knurled key file and a threaded file! And a hat head! Most of the T-shaped head wheel bolts are above 8.8 grade, which bears the large torsion connection between the car wheel and the axle! Most of the double-headed wheel bolts are above grade 4.8, which bear the lighter torsion connection between the outer wheel hub shell and the tire.

Advantage

• Quick and easy installation and removal using hand tools
• Pre-lubrication
• High corrosion resistance
• Reliable locking
• Reusable (depending on usage environment)

Our Hub bolt quality standard

10.9 hub bolt

hardness 36-38HRC
tensile strength  ≥ 1140MPa
Ultimate Tensile Load  ≥ 346000N
Chemical Composition  C:0.37-0.44  Si:0.17-0.37  Mn:0.50-0.80   Cr:0.80-1.10

12.9 hub bolt

hardness 39-42HRC
tensile strength  ≥ 1320MPa
Ultimate Tensile Load  ≥406000N
Chemical Composition C:0.32-0.40 Si:0.17-0.37 Mn:0.40-0.70   Cr:0.15-0.25

Manufacturing process of bolts

1、Spheroidizing annealing of high-strength bolts

When the hexagon socket head bolts are produced by the cold heading process, the original structure of the steel will directly affect the forming ability during cold heading processing. Therefore, the steel must have good plasticity. When the chemical composition of the steel is constant, the metallographic structure is the key factor determining the plasticity. It is generally believed that the coarse flaky pearlite is not conducive to cold heading forming, while the fine spherical pearlite can significantly improve the plastic deformation ability of the steel.
For medium carbon steel and medium carbon alloy steel with a large amount of high-strength fasteners, spheroidizing annealing is performed before cold heading, so as to obtain uniform and fine spheroidized pearlite to better meet the actual production needs.

2、 Shelling and descaling of high-strength bolts

The process of removing iron oxide plate from cold heading steel wire rod is stripping and descaling. There are two methods: mechanical descaling and chemical pickling. Replacing the chemical pickling process of wire rod with mechanical descaling improves productivity and reduces environmental pollution. This descaling process includes bending method, spraying method, etc. The descaling effect is good, but the residual iron scale cannot be removed. Especially when the scale of the iron oxide scale is very strong, so the mechanical descaling is affected by the thickness of the iron scale, the structure and the stress state, and is used in carbon steel wire rods for low-strength fasteners. After mechanical descaling, the wire rod for high-strength fasteners undergoes a chemical pickling process to remove all the iron oxide scales, that is, compound descaling. For low carbon steel wire rods, the iron sheet left by mechanical descaling is likely to cause uneven wear of grain drafting. When the grain draft hole adheres to the iron sheet due to the friction of the wire rod and the external temperature, the surface of the wire rod produces longitudinal grain marks.

FAQ

Q1. how is your production management and quality control system?
A:There are three testing process to ensure product quality.
B:Products 100% detection
C:The first test: raw materials
D:The second test: semi-finished products
E:The third test: the finished product

Q2. Can your factory print our brand on the product?
Yes. Customers need to provide us a logo usage authorization letter to allow us to print customer’s logo on the products.

Q3. Is your factory able to design our own package and help us in market planning?
Our factory has more than 20 years experience to deal with package box with customers’ own logo.
We have a design team and a marketing plan design Team to service our customers for this

 


Product detail pictures:

Wholesale Actros Truck Hub Bolt - Hino Fuso Universal Rear Bolt – JINQIANG detail pictures


Related Product Guide:

We know that we only thrive if we can guarantee our combined price tag competiveness and top quality advantageous at the same time for Wholesale Actros Truck Hub Bolt - Hino Fuso Universal Rear Bolt – JINQIANG , The product will supply to all over the world, such as: Tunisia, Auckland, Turin, Profession, Devoting are always fundamental to our mission. We have always been in line with serving customers, creating value management objectives and adhering to the sincerity, dedication, persistent management idea.
  • On this website, product categories is clear and rich, I can find the product I want very quickly and easily, this is really very good!
    5 Stars By Jean from Mauritania - 2017.06.19 13:51
    After the signing of the contract, we received satisfactory goods in a short term, this is a commendable manufacturer.
    5 Stars By Antonia from Russia - 2018.12.05 13:53
    Write your message here and send it to us