1. Material introduction.
Wheel hub bolt is an indispensable part of vehicle driving safety. It is usually made of high-strength alloy steel, which has excellent tensile strength and wear resistance, ensuring stability even in difficult road conditions.
2. Maintenance precautions.
1.Regular cleaning: Clean the wheel bolts regularly to remove soil, oil and rust on the surface. This can not only extend the service life of the bolt, but also ensure good contact between the bolt and the nut, improving the fastening effect.
2.Avoid corrosion: Wheel bolts are exposed to moisture and corrosive environments for a long time and are susceptible to corrosion. Therefore, during storage and use, contact with corrosive substances such as acid and alkali should be avoided. If the bolt has been corroded, replace it in time.
3. Check the fastening state: before each trip and after a certain mileage, check the fastening state of the wheel bolts. If the bolt is found to be loose or falling off, it should be stopped immediately to ensure driving safety.
4. Do not over-tighten: Although the hub bolt needs to be tightened, over-tightening may cause the bolt to break or be damaged. Therefore, when tightening bolts, it is important to follow the vehicle manufacturer’s recommended torque.
5. Timely replacement: If the wheel bolts are found to have cracks, wear or other damage, the new bolts should be replaced in time. Do not use inferior or do not meet the specifications of the bolt replacement, so as not to affect the safety of driving.
Post time: May-30-2024