Hot New Products 10.9 Truck Hub Bolt - NPR TRUCK REAR Wheel Bolt factory wholesale – JINQIANG Detail:
Manufacturing process of high strength bolts
Shelling and descaling of high-strength bolts
The process of removing iron oxide plate from cold heading steel wire rod is stripping and descaling. There are two methods: mechanical descaling and chemical pickling. Replacing the chemical pickling process of wire rod with mechanical descaling improves productivity and reduces environmental pollution. This descaling process includes bending method, spraying method, etc. The descaling effect is good, but the residual iron scale cannot be removed. Especially when the scale of the iron oxide scale is very strong, so the mechanical descaling is affected by the thickness of the iron scale, the structure and the stress state, and is used in carbon steel wire rods for low-strength fasteners. After mechanical descaling, the wire rod for high-strength fasteners undergoes a chemical pickling process to remove all the iron oxide scales, that is, compound descaling. For low carbon steel wire rods, the iron sheet left by mechanical descaling is likely to cause uneven wear of grain drafting. When the grain draft hole adheres to the iron sheet due to the friction of the wire rod and the external temperature, the surface of the wire rod produces longitudinal grain marks.
Our Hub bolt quality standard
10.9 hub bolt
| hardness | 36-38HRC |
| tensile strength | ≥ 1140MPa |
| Ultimate Tensile Load | ≥ 346000N |
| Chemical Composition | C:0.37-0.44 Si:0.17-0.37 Mn:0.50-0.80 Cr:0.80-1.10 |
12.9 hub bolt
| hardness | 39-42HRC |
| tensile strength | ≥ 1320MPa |
| Ultimate Tensile Load | ≥406000N |
| Chemical Composition | C:0.32-0.40 Si:0.17-0.37 Mn:0.40-0.70 Cr:0.15-0.25 |
FAQ
Q1: What else products you can make without wheel bolt?
Almost all kinds of truck parts we can make for you. Brake pads, center bolt, U bolt, steel plate pin, Truck Parts Repair Kits, casting, bearing and so on.
Q2: Do you have an International Certificate of Qualification?
Our company has obtained the 16949 quality inspection certificate, passed international quality management system certification and always adhere to automotive standards of GB/T3098.1-2000.
Q3: Can products be made to order?
Welcome to send drawings or samples to order.
Q4: How much space does your factory occupy?
It’s 23310 square meters.
Q5: What is the contact information?
Wechat, whatsapp, E-mail, mobile phone, Alibaba, website.
Q6: What kind of materials are there?
40Cr 10.9,35CrMo 12.9.
Q7: What is the surface color?
Black phosphating, gray phosphating, Dacromet, electroplating, etc.
Q8: What is the annual production capacity of the factory?
About a million pcs of bolts.
Product detail pictures:
Related Product Guide:
We continue to keep increasing and perfecting our solutions and service. At the same time, we operate actively to do research and enhancement for Hot New Products 10.9 Truck Hub Bolt - NPR TRUCK REAR Wheel Bolt factory wholesale – JINQIANG , The product will supply to all over the world, such as: Canada, Latvia, Las Vegas, We welcome customers from all over the world come to discuss business. We supply high quality solutions, reasonable prices and good services. We hope to sincerely build business relationships with customers from at home and abroad, jointly striving for a resplendent tomorrow.
By David Eagleson from Malaysia - 2018.12.14 15:26
Although we are a small company, we are also respected. Reliable quality, sincere service and good credit, we are honored to be able to work with you!
By Cherry from Cyprus - 2018.09.16 11:31
